Intel SSD Data Center Tool 3.0.27 [Latest]

FULL INFO BELOW:

Intel SSD Data Center Tool - is a drive management tool for SSDs in the Intel? SSD Data Center Family. It provides the following key features for both SATA- and PCIe*-based


Data Center Intel SSDs

? Detect PCIe/NVMe- and SATA-based Intel? SSD Data Center devices attached to a host system.

? Parse an Intel SSDs Identify Device information.

? Parse an Intel SSDs SMART (Self-Monitoring and Reporting Technology) information.

? Resize the Intel SSDs usable storage capacity by changing its maximum LBA setting.

? Update Intel SSD firmware:

? The tool carries a firmware payload for all supported drives.

? When drive information is displayed, the tool will indicate if a new firmware release is available.

? The tool doesnt update firmware on Engineering Sample (ES) drives.

? Calculate drive life expectancy (Endurance Analyzer feature).

? Enable/Disable Latency Tracking.

? Parse read and write commands Latency Tracking logs.

? Read and/or modify the SM Bus Address for PCIe NVMe family drives.

? Set the Power Governor Mode (vendor unique feature). Three Modes are supported:

? 0: 25-watts for PCIe NVMe devices; 40-watts for PCIe NVMe x8 devices; unconstrained for SATA devices

? 1: 20-watts for PCIe NVMe devices; 35-watts for PCIe NVMe x8 devices; typical (7-watts) for SATA devices

? 2: 10-watts for PCIe NVMe devices; 25-watts for PCIe NVMe x8 devices; low (5-watts) for SATA devices.

? The Intel SSD Data Center Tool features a Command Line Interface (CLI) for both Windows* and Linux*.
Download

Intel SSD Data Center Tool 3.0.27 x32 (48 MB)

Intel SSD Data Center Tool 3.0.27 x64 (49 MB)