![Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support.
Measurements:
Frequency response magnitude and phaseImpulse responseAuto and cross correlationTime delay (latency)Group delaySignal-to-noise ratio (SNR)Total harmonic distortion (THD, THD+N)CoherenceCrest factor and rms, peak, and peak-to-peak signal levelsSignal mean, variance, and standard deviation valuesFlat, A, and C-weighted equivalent (Leq), time-weighted (Lp), and percentile-exceeded (Lx) sound levelsAnd more!
Built-in Tools:
Dual FFT Analyzer (TF/IR analyzer)FFT AnalyzerMeter BridgeOctave Analyzer (RTA)OscilloscopeSignal GeneratorSound Level MeterSpectrogramX/Y Plotter
Available via in-app purchase:
Room Analyzer tool for estimating room acoustics parameters from impulse response data (T20, T30, T60, EDT, Clarity, Definition, Center Time).Noise Dosimeter tool for measuring noise dose with various threshold and criterion levels, with 3, 4, and 5 dB exchange rates.
Electroacoustics Toolbox is a project-based application, which allows you to configure and save project files. Projects may contain one or more tools available in the toolbox, along with any captured data associated with those tools. Electroacoustics Toolbox allows for the creation of an arbitrary number of tools of a certain type, or tools of different types. For example, a project may contain an oscilloscope, two FFT analyzers, and two signal generators. The oscilloscope and FFT analyzers may each simultaneously analyze multiple input channels of a single device. However, there is no requirement that all tools must work with the same device.
The Toolbox also offers advanced capabilities for configuring input and output device parameters and assigning labels, units, and transducer sensitivities to individual input and output channels.
Electroacoustics Toolbox Features
Hardware-accelerated OpenGL graphics for fast real-time plottingQuartz-based graphics for high-resolution still images and printsAdvanced control over input and output devicesWhole device and individual channel sensitivity (level) calibrationSupport for units, including Volts, Amps, pascals, and Engineering UnitsSaving complete configurations and data in project filesExporting data to ascii text or MAT-files for easy import into other applicationsWork with multiple independent audio devices simultaneouslyNo arbitrary limits on how many devices or channels are used, or on sample rates or signal formats ?these are limited only by your hardwareAppleScript support for measurement automation and remote control
New in this version:
Bug fixes for AppleScript access to the Dual FFT Analyzer tool.
#](https://audiolove.me/uploads/posts/2019-02/17021923_faber-acoustical-electroacoustics-toolbox.png)
Product Details
FULL INFO BELOW:
Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support.
Measurements:
Frequency response magnitude and phaseImpulse responseAuto and cross correlationTime delay (latency)Group delaySignal-to-noise ratio (SNR)Total harmonic distortion (THD, THD+N)CoherenceCrest factor and rms, peak, and peak-to-peak signal levelsSignal mean, variance, and standard deviation valuesFlat, A, and C-weighted equivalent (Leq), time-weighted (Lp), and percentile-exceeded (Lx) sound levelsAnd more!
Built-in Tools:
Dual FFT Analyzer (TF/IR analyzer)FFT AnalyzerMeter BridgeOctave Analyzer (RTA)OscilloscopeSignal GeneratorSound Level MeterSpectrogramX/Y Plotter
Available via in-app purchase:
Room Analyzer tool for estimating room acoustics parameters from impulse response data (T20, T30, T60, EDT, Clarity, Definition, Center Time).Noise Dosimeter tool for measuring noise dose with various threshold and criterion levels, with 3, 4, and 5 dB exchange rates.
Electroacoustics Toolbox is a project-based application, which allows you to configure and save project files. Projects may contain one or more tools available in the toolbox, along with any captured data associated with those tools. Electroacoustics Toolbox allows for the creation of an arbitrary number of tools of a certain type, or tools of different types. For example, a project may contain an oscilloscope, two FFT analyzers, and two signal generators. The oscilloscope and FFT analyzers may each simultaneously analyze multiple input channels of a single device. However, there is no requirement that all tools must work with the same device.
The Toolbox also offers advanced capabilities for configuring input and output device parameters and assigning labels, units, and transducer sensitivities to individual input and output channels.
Electroacoustics Toolbox Features
Hardware-accelerated OpenGL graphics for fast real-time plottingQuartz-based graphics for high-resolution still images and printsAdvanced control over input and output devicesWhole device and individual channel sensitivity (level) calibrationSupport for units, including Volts, Amps, pascals, and Engineering UnitsSaving complete configurations and data in project filesExporting data to ascii text or MAT-files for easy import into other applicationsWork with multiple independent audio devices simultaneouslyNo arbitrary limits on how many devices or channels are used, or on sample rates or signal formats ?these are limited only by your hardwareAppleScript support for measurement automation and remote control
New in this version:
Bug fixes for AppleScript access to the Dual FFT Analyzer tool.
Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support.
Measurements:
Frequency response magnitude and phaseImpulse responseAuto and cross correlationTime delay (latency)Group delaySignal-to-noise ratio (SNR)Total harmonic distortion (THD, THD+N)CoherenceCrest factor and rms, peak, and peak-to-peak signal levelsSignal mean, variance, and standard deviation valuesFlat, A, and C-weighted equivalent (Leq), time-weighted (Lp), and percentile-exceeded (Lx) sound levelsAnd more!
Built-in Tools:
Dual FFT Analyzer (TF/IR analyzer)FFT AnalyzerMeter BridgeOctave Analyzer (RTA)OscilloscopeSignal GeneratorSound Level MeterSpectrogramX/Y Plotter
Available via in-app purchase:
Room Analyzer tool for estimating room acoustics parameters from impulse response data (T20, T30, T60, EDT, Clarity, Definition, Center Time).Noise Dosimeter tool for measuring noise dose with various threshold and criterion levels, with 3, 4, and 5 dB exchange rates.
Electroacoustics Toolbox is a project-based application, which allows you to configure and save project files. Projects may contain one or more tools available in the toolbox, along with any captured data associated with those tools. Electroacoustics Toolbox allows for the creation of an arbitrary number of tools of a certain type, or tools of different types. For example, a project may contain an oscilloscope, two FFT analyzers, and two signal generators. The oscilloscope and FFT analyzers may each simultaneously analyze multiple input channels of a single device. However, there is no requirement that all tools must work with the same device.
The Toolbox also offers advanced capabilities for configuring input and output device parameters and assigning labels, units, and transducer sensitivities to individual input and output channels.
Electroacoustics Toolbox Features
Hardware-accelerated OpenGL graphics for fast real-time plottingQuartz-based graphics for high-resolution still images and printsAdvanced control over input and output devicesWhole device and individual channel sensitivity (level) calibrationSupport for units, including Volts, Amps, pascals, and Engineering UnitsSaving complete configurations and data in project filesExporting data to ascii text or MAT-files for easy import into other applicationsWork with multiple independent audio devices simultaneouslyNo arbitrary limits on how many devices or channels are used, or on sample rates or signal formats ?these are limited only by your hardwareAppleScript support for measurement automation and remote control
New in this version:
Bug fixes for AppleScript access to the Dual FFT Analyzer tool.
Faber Acoustical Electroacoustics Toolbox v3.9.1
Referal Link: https://bit.ly/2BG70f1
Added: 17.Feb.2019
Catagory: Mac
Product ID: 781
Our Price Before 10% Deduction
Bonuses For Regular Customers
£14.99
ADD TO YOUR CART or BUY NOW
Or Contact Us For Alternative Payment Options
Delivery & Download
![](../assets/images/preloader/downloading3.gif)
![](../assets/images/preloader/AI.png)
Delivery Details
-
A Link is sent to your Email
Once your order has been placed an initial email will be provided to notify you that your order has been received , You can expect to recieve this confirmation email within 5 - 15 minutes after your purchase.
The Email Delivered soon after confirmation will contain a Link that will take you to your Download.
Download times are dependent on your own internet speeds.
You will receive in your download ALL Files needed for install
These files will include Everything Needed To Setup The Product
Including Full Install And Activation Instructions Or a Video
Any Serials or Activators Will Also Be Provided.
![](https://www.1440.io/wp-content/uploads/2022/06/1440-Trustpilot-Partnership.png)